Engineering, 03.12.2019 03:31 natetheman7740
Avertical plate, l=3m, maintained at 90°c, is used to condense saturated steam at 1 atm by circulating cooling water through the reverse side. determine the rate of heat transfer to/from the plate and the rate of condensation of steam
Answers: 3
Engineering, 04.07.2019 18:10
Abrake has a normal braking torque of 2.8 kip in and heat-dissipating cast-iron surfaces whose mass is 40 lbm. suppose a load is brought to rest in 8.0 s from an initial angular speed of 1600 rev/min using the normal braking torque; estimate the temperature rise of the heat dissipating surfaces.
Answers: 3
Engineering, 04.07.2019 18:10
Water at 70°f and streams enter the mixing chamber at the same mass flow rate, determine the temperature and the quality of the exiting stream. 0 psia is heated in a chamber by mixing it with saturated water vapor at 20 psia. if both streams enters the mixing chamber at the same mass flow rate, determine the temperature and the quality of the existing system.
Answers: 2
Engineering, 04.07.2019 18:10
During a steady flow process, the change of energy with respect to time is zero. a)- true b)- false
Answers: 2
Engineering, 04.07.2019 18:10
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
Avertical plate, l=3m, maintained at 90°c, is used to condense saturated steam at 1 atm by circulati...
Mathematics, 21.06.2021 22:40
Mathematics, 21.06.2021 22:40
History, 21.06.2021 22:40
English, 21.06.2021 22:40
English, 21.06.2021 22:40
Mathematics, 21.06.2021 22:40
Mathematics, 21.06.2021 22:40