Engineering, 03.12.2019 21:31 aliami0306oyaj0n

You are designing an off-grid solar power system with battery back-up storage for your log cabin in northern michigan. you use batteries to store excess electricity produced by the panels, which are discharged to supply the energy demanded by the house. use the following system parameters in your analysis:
pv module efficiency (at 1 kw/m^2 solar intensity): 20%, capacity factor: 14%
installation price: $6/watt (rated power), area per module: 1.5 m^2
1. the average power requirement of your cabin during the daytime hours is 1 kw. how many modules must you purchase, if you would like to produce enough total electrical energy to satisfy this demand for 8 hours/day (round to the nearest module)?

Answers: 2

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Thermal stresses are developed in a metal when its a) initial temperature is changed b) final temperature is changed c) density is changed d) thermal deformation is prevented e) expansion is prevented f) contraction is prevented

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Manometers are good examples of measuring instruments, nowadays they are not as common as before. a)-capacitive probe gauges b)-gravitational gauges deformation ) gauges d)-digital gauges

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Ahot wire operates at a temperature of 200°c while the air temperature is 20°c. the hot wire element is a tungsten wire of 5 um diameter and 2 mm in length. plot using excel current, heat transfer and heat generated by the wire for air velocity varying from 1-10 m/s in steps of lm/s? matlab the sensor voltage output, resistance, or assume nu 0.989 re033pr13 take air properties at tr (200°c20°c)/2 = 110°c properties of tungsten: c 0.13 kj/kg.k 3 p 19250 kg/m k (thermal conductivity) = 174 w/m.k

Answers: 2

Answer

Engineering, 04.07.2019 18:20

Asimple rankine cycle uses water as the working fluid. the water enters the turbine at 10 mpa and 480c while the condenser operates at 6 kpa. if the turbine has an isentropic efficiency of 80 percent while the pump has an isentropic efficiency of 70 percent determine the thermal efficiency

Answers: 1

Answer

You know the right answer?

You are designing an off-grid solar power system with battery back-up storage for your log cabin in...

Questions