Engineering, 04.12.2019 00:31 alialoydd11

In a language of your own choosing, write a computer program that emulates a batcher-banyan network with 8 inputs and 8 outputs. for this project, you don’t need to implement a bitonic sorter; you may use any sorting algorithm you wish. in addition to program source code, provide a screenshot showing the deliverable are identified below. demonstrate that your program works in the following input cases by showing, the before and after of packet sorting, and where each packet travels at each stage of your multistage network. a. one packetb. two packets (different destinations)c. four packets (different destinations)d. six packets (different destinations)e. seven packets (different destinations)f. skip the sorting stage to show an example of output port contention with two packets destined for the same output portg. skip the sorting stage to show an example of path contention with two packets destined for the same shared link

Answers: 2

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

If a particle moves along a path such that r : (3 sin t) m and ? : 2t rad, where t is in seconds. what is the particle's acceleration in m/s in 4 seconds? a)- 16.43 b)- 16.29 c)- 15.21 d)- 13.79

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Apump is used to circulate hot water in a home heating system. water enters the well-insulated pump operating at steady state at a rate of 0.42 gal/min. the inlet pressure and temperature are 14.7 lbf/in.2, and 180°f, respectively; at the exit the pressure is 60 lbf/in.2 the pump requires 1/15 hp of power input. water can be modeled as an incompressible substance with constant density of 60.58 lb/ft3 and constant specific heat of 1 btu/lb or. neglecting kinetic and potential energy effects, determine the temperature change, in °r, as the water flows through the pump.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Air is to be cooled in the evaporator section of a refrigerator by passing it over a bank of 0.8-cm-outer-diameter and 0.4-m-long tubes inside which the refrigerant is evaporating at -20°c. air approaches the tube bank in the normal direction at 0°c and 1 atm with a mean velocity of 4 m/s. the tubes are arranged in-line with longitudinal and transverse pitches of sl- st 1.5 cm. there are 30 rows in the flow direction with 15 tubes in each row. determine (a) the refrigeration capacity of this system and (b) pressure drop across the tube bank. evaluate the air properties at an assumed mean temperature of -5°c and 1 atm. is this a good assumption?

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Items are similar to the free issue items, but their access is limited. (clo5) a)-bin stock items free issue b)-bin stock controlled issue c)-critical or insurance spares d)-rebuildable spares e)-consumables

Answers: 1

Answer

You know the right answer?

In a language of your own choosing, write a computer program that emulates a batcher-banyan network...

Questions