Engineering, 04.12.2019 04:31 kahnerp6448

8-36 using the batch simulator screen, write a program that will implement the following tank filling and mixing sequence. the start button is pressed to start input pump p1 after 100 gallons (one flowmeter pulse per gallon) input pump p1 stops automatically and the mixer motor starts. o the mixer motor is automatically stopped after 30 seconds, and the input pump p1 is started after an additional 60 gallons are pumped into the tank, the input pump stops and the mixer motor starts. the mixer motor is operated for 20 seconds and stops. o the discharge pump p3 motor is started automatically and runs until the low-level sensor is actuated. the process stops use the following addresses in developing the program start pb : 1/0 stop pb : 1/1 input flowmeter_: 1/5 low-level sensor_ l: 1/3 mixer motor 0: 2/0 oinput pump p1 o: 2/1 discharge pump p3_ o: 2/3 ointernal relay_ b3: 0/0 o ctu c5: 1 o ctu c5: 2 orto t4: 1 orto t4: 2 o c

Answers: 2

Show answers

Another question on Engineering

Engineering, 03.07.2019 14:10

Explain the difference laminar and turbulent flow. explain it with the shear stress and the velocity profiles.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Compute the pressure drop of 30°c air flowing with a mean velocity of 8 m/s in a circular sheet-metal duct 300 mm in diameter and 15 m long. use a friction factor, f 0.02, and pair = 1.1644 kg/m a. 37.26 pa b. 25.27 pa n c. 29.34 pa d. 30.52 pa

Answers: 1

Answer

Engineering, 04.07.2019 18:20

A3-mm-thick panel of aluminum alloy (k 177 w/m-k, c 875 j/kg-k and ? = 2770 kg/m) is finished on both sides with an epoxy coating that must be cured at or above t,-150°c for at least 5 min. the production line for the curing operation involves two steps: (1) heating in a large oven with air at ts,0-175°c and a convection coefficient of h, 40 w/m2. k, and (2) cooling in a large chamber with air at 25°c and a con- vection coefficient of he 10 w/m2.k. the heating portion of the process is conducted over a time interval te which exceeds the ime required to reach 150°c by 5 min (h = r + 300 s). the coating has an emissivity of ? = 0.8, and the temperatures of the oven and chamber walls are 175 and 25°c, respectively. if the panel is placed in the oven at an initial temperature of 25°c and removed from the chamber at a safe-to-touch tempera ture of 37°c, what is the total elapsed time for the two-step curing operation?

Answers: 3

Answer

Engineering, 04.07.2019 19:10

The sum of the normal stresses does not change as the stress state rotates through an angle. a)-trune b)- false

Answers: 2

Answer

You know the right answer?

8-36 using the batch simulator screen, write a program that will implement the following tank fillin...

Questions