subject
Engineering, 05.12.2019 03:31 QueenNerdy889

Avapor mixture of n-butane (b) and n-hexane (h) contains 50.0 mole% butane at 120 °c and 1 atm. a stream of this mixture flowing at a rate of 150.0 l/s is cooled and compressed, causing some but not all of the vapor to condense. (treat this process as a single-unit operation.) liquid and vapor product streams emerge from the process in equilibrium at t (°c) and 1100 mmhg. the vapor product contains 60.0 mole% butane. determine: a)the required final temperature (t) b)the composition of the liquid product (component mole fractions) c)the molar flow rates of the liquid and vapor products.

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 16:10
An electrical motor raises a 50kg load at a construct velencity .calculate the power of the motor, if it takes 40sec to raise the load through a height of 24m(take g =9.8n/g)
Answers: 2
question
Engineering, 04.07.2019 18:10
Water in a partially filled large tank is to be supplied to the roof top, which is 8 m above the water level in the tank, through a 2.2-cm-internal-diameter pipe by maintaining a constant air pressure of 300 kpa (gage) in the tank. if the head loss in the piping is 2 m of water, determine the discharge rate of the supply of water to the roof top in liters per second.
Answers: 3
question
Engineering, 04.07.2019 18:10
Atmospheric air has a temperature (dry bulb) of 80° f and a wet bulb temperature of 60° f when the barometric pressure is 14.696 psia. determine the specific humidity, grains/lb dry air. a. 11.4 c. 55.8 d. 22.5 b. 44.1
Answers: 1
question
Engineering, 04.07.2019 19:20
At steady state, air at 200 kpa, 325 k, and mass flow rate of 0.5 kg/s enters an insulated duct having differing inlet and exit cross-sectional areas. the inlet cross-sectional area is 6 cm2. at the duct exit, the pressure of the air is 100 kpa and the velocity is 250 m/s. neglecting potential energy effects and modeling air as an 1.008 kj/kg k, determine ideal gas with constant cp = (a) the velocity of the air at the inlet, in m/s. (b) the temperature of the air at the exit, in k. (c) the exit cross-sectional area, in cm2
Answers: 2
You know the right answer?
Avapor mixture of n-butane (b) and n-hexane (h) contains 50.0 mole% butane at 120 °c and 1 atm. a st...
Questions
question
English, 06.11.2021 03:10
question
English, 06.11.2021 03:10
question
Mathematics, 06.11.2021 03:10
question
Biology, 06.11.2021 03:10
Questions on the website: 13722361