Engineering, 05.12.2019 23:31 nunuskies
Aparticular robotic arm requires a current pulse to start motion. design an rlc circuit that provides a current pulse to a 50 ω load with amplitude of 500 ma at 1 ms and maintains a current of 250 ma or higher for a duration of at least 1 ms. the current pulse should decay to below 50 ma for t > 15 ms. plot and analyze your result using matlab or spice simulation to verify your design.
Answers: 2
Another question on Engineering
Engineering, 04.07.2019 18:10
An air conditioning system consist of a 5 cm diameter pipe, operating at a pressure of 200 kpa. the air initially enters the pipe at 15°c with a velocity of 20 m/s and relative humidity of 80%. if the heat supply throughout the process is 960 w, determine the relative humidity and the temperature at the outlet
Answers: 3
Engineering, 04.07.2019 18:10
Water at 55c flows across a flat plate whose surface temperature is held constant at 95c. if the temperature gradient at the plate's surface for a given value of x is 18 c/mm, find a) local heat transfer coefficient. b) heat flux
Answers: 3
Engineering, 04.07.2019 18:10
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
Engineering, 04.07.2019 19:10
What are the major differences between injection molding and extrusion?
Answers: 2
You know the right answer?
Aparticular robotic arm requires a current pulse to start motion. design an rlc circuit that provide...
Questions
Mathematics, 05.05.2020 18:34
Mathematics, 05.05.2020 18:34
Mathematics, 05.05.2020 18:34
Mathematics, 05.05.2020 18:34
Mathematics, 05.05.2020 18:34
Mathematics, 05.05.2020 18:34
