Engineering, 06.12.2019 00:31 jameskatzfeystu70

Consider a simple gas turbine power plant. air enters the compressor at 30°c and 100 kpa (state 1) with a mass flow rate of 12.6 kg/s and exits at 260°c and 700 kpa (state 2). a fuel with a heating value of 42,000 kj/kg is burned in the combustion chamber with an air-fuel ratio of 60 and a combustion efficiency of 97%. product gases (modeled as air) enter the turbine (state 3) and expand to 100 kpa (state 4). isentropic efficiency of the turbine is 85%. assume constant specific heats at 500°c for air.
(a) calculate the isentropic efficiency of the compressor, in %.
(b) determine the net power output, in kw.
(c) find thermal efficiency of the cycle, in %.
(d) what is the exergetic efficiency of the cycle, in %?

Answers: 2

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Acompressor receives the shaft work to decrease the pressure of the fluid. a)- true b)- false

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10

Answers: 1

Answer

Engineering, 06.07.2019 02:30

Plot schematically the tensile stress versus strain curves for a typical thermoplastic material at a temperature below its glass transition temperature (tg and at a temperature above its tg, respectively. do the same for a typical thermosetting material. list in a table any differences or similarities between the two materials at t> tg and t < tg, respectively, and relate them to the structures of the two types of polymers

Answers: 3

Answer

Engineering, 06.07.2019 03:10

List and describe the attached tools in boxford cnc milling machine? and how many tools were used in your projects explain them?

Answers: 3

Answer

You know the right answer?

Consider a simple gas turbine power plant. air enters the compressor at 30°c and 100 kpa (state 1) w...

Questions