Engineering, 06.12.2019 01:31 butterscotchsjoqsvoz

Aspeed-reducer gearbox containing a compound reverted gear train transmits 45 horsepower with an input speed of 1200 rev/min. spur gears with 20◦ pressure angle are used, with 16 teeth on each of the small gears and 48 teeth on each of the larger gears. a diametral pitch of 10 teeth/in is proposed.
(a) determine the speeds of the intermediate and output shafts.
(b) determine the pitch line velocities (in ft/min) for each set of gears.
(c) determine the magnitudes of the tangential, radial, and total forces transmitted between each set of gears.
(d) determine the input torque.
(e) determine the output torque, neglecting frictional losses.

Answers: 3

Show answers

Another question on Engineering

Engineering, 04.07.2019 08:10

Which of the following is an easy way to remember the modified “x” tire rotation? a. nondrive wheels straight, cross the drive wheels b. drive wheels straight, cross the nondrive wheels c. drive wheels crossed, nondrive wheels straight d. drive wheels crossed, nondrive wheels crossed

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Apump is used to circulate hot water in a home heating system. water enters the well-insulated pump operating at steady state at a rate of 0.42 gal/min. the inlet pressure and temperature are 14.7 lbf/in.2, and 180°f, respectively; at the exit the pressure is 60 lbf/in.2 the pump requires 1/15 hp of power input. water can be modeled as an incompressible substance with constant density of 60.58 lb/ft3 and constant specific heat of 1 btu/lb or. neglecting kinetic and potential energy effects, determine the temperature change, in °r, as the water flows through the pump.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Thermal stresses are developed in a metal when its a) initial temperature is changed b) final temperature is changed c) density is changed d) thermal deformation is prevented e) expansion is prevented f) contraction is prevented

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Condition monitoring is a major component of. (clo4) a)- predictive maintenance. b)-preventive maintenance c)-proactive maintenance d)-reactive maintenance.

Answers: 1

Answer

You know the right answer?

Aspeed-reducer gearbox containing a compound reverted gear train transmits 45 horsepower with an inp...

Questions