Areheat rankine cycle operates a boiler at 7 mpa with a super-heater outlet temperature of 500°c, 100% hp turbine outlet steam quality, re-heater outlet temperature of 400 °c, and lp turbine outlet (condenser inlet) steam quality of 100%. assuming isentropic pump and turbine, the thermal efficiency of this cycle would be %.

When at a point two solid phase changes to one solid phase on cooling then it is known as a) eutectoid point b) eutectic point c) peritectic point d) peritectoid point

If you were designing a bumper for a car, would you prefer it to exhibit elastic or plastic deformation? why? consider the functions of a bumper in both a minor "fender-bender" and a major collision.

Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.