Engineering, 11.12.2019 00:31 wetogether0123

Afriend of the family ask you to babysit their 5 year old named boba fett. after the kid tablet run out of battery and is almost at the point to start screaming, you decide to play a game. since you are an expert in matlab or at least love writing some easy scripts, you decide to worka game for him. you want matlab to generate a random integer number that boba fett will guess. expected from this program: generate a random integer (no higher than 35). ask the user to input a guess. specify how high the guess could be. check the guess given for the user. if the guess is too low tell the user to try again because the guess was too low. use the kids name. do the same if the guess is too high when the guess is equal to the random number congratulate boba fett. if you can add sounds to the game, boba fett will be more eager to play again which will give you time to watch one can get bonus points. over and over episode of the big bang theory. plus you example: enter your guess between 1 and 20: 5 sorry your guess is too low enter your next guess: 15 sorry your guess is too high

Answers: 2

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Journeyman training is usually related (clo2) a)-to specific tasks b)-to cost analysis of maintenance task c)-to control process to ensure quality d)-to installation of machinery

Answers: 2

Answer

Engineering, 04.07.2019 18:20

Refrigerant-134a enters the compressor of a refrigerator as superheated vapor at 0.14 mpa and -10°c at a rate of 0.05 ka/s and leaves at 0.8 mpa and 50°c. the refrigerant is cooied in the condenser to 0.72 mpa and 26'c. it is then throttled to 0.15 mpa. sketch the t-s diagram for the system and evaluate: 6) the rate of heat removai from the refrigerated space (kw), it) the power input to the compressor (kw), ii) the isentropic efficiency of the compressor (%), and iv) the cop of the refrigerator.

Answers: 2

Answer

Engineering, 04.07.2019 19:10

A)-explain briefly the importance of standards in engineering design. b)- what is patent? c)-explain the relationship between these standards: b.s. and b.s.en d)- in engineering design concepts, types of loads and how they act are important factors. explain.

Answers: 3

Answer

Engineering, 04.07.2019 19:20

At steady state, air at 200 kpa, 325 k, and mass flow rate of 0.5 kg/s enters an insulated duct having differing inlet and exit cross-sectional areas. the inlet cross-sectional area is 6 cm2. at the duct exit, the pressure of the air is 100 kpa and the velocity is 250 m/s. neglecting potential energy effects and modeling air as an 1.008 kj/kg k, determine ideal gas with constant cp = (a) the velocity of the air at the inlet, in m/s. (b) the temperature of the air at the exit, in k. (c) the exit cross-sectional area, in cm2

Answers: 2

Answer

You know the right answer?

Afriend of the family ask you to babysit their 5 year old named boba fett. after the kid tablet run...

Questions