subject
Engineering, 11.12.2019 17:31 LuvIsRage2

1. a test specimen in a tensile test has a gage length of 2.0 in and an area = 0.5 in2. during the test the specimen yields under a load of 32,000 lb. the corresponding gage length = 2.0083 in. this is the 0.2 percent yield point. the maximum load of 60,000 lb is reached at a gage length = 2.60 in. determine (a) yield strength, (b) modulus of elasticity, and (c) tensile strength. (d) if fracture occurs at a gage length of 2.92 in, determine the percent elongation. (e) if the specimen necked to an area = 0.25 in2, determine the percent reduction in area.

ansver
Answers: 3

Another question on Engineering

question
Engineering, 03.07.2019 15:10
Apiston-cylinder with a volume of 0.25 m3 holds 1 kg of air (r 0.287 k/kgk) at a temperature of 100 c. heat transfer to the cylinder causes an isothermal expansion of the piston until the volume triples. how much heat is added to the piston-cylinder?
Answers: 3
question
Engineering, 04.07.2019 18:10
Afour cylinder four-stroke in-line engine has a stroke of 160mm, connecting rod length of 150mm, a reciprocating mass of 3kg and its firing order is 1-3-4-2. the spacing between cylinders is 100mm. i. show that the engine is in balance with regard to the primary inertia forces and primary 3. a and secondary inertia couples. li determine the out of balance secondary inertia force ii. propose ways of balancing this out of balance force and discuss the challenges that will arise
Answers: 3
question
Engineering, 04.07.2019 18:10
Different types of steels contain different elements that alter the characteristics of the steel. for each of the following elements, explain what the element does when alloyed with steel.
Answers: 2
question
Engineering, 04.07.2019 19:10
Asteel wire of 2 mm diameter is fixed between two points located 2 m apart. the tensile force in the wire is 250n, if its density of steel is given by 7830 kg/m3 the fundamental frequency of vibration hz? ?
Answers: 3
You know the right answer?
1. a test specimen in a tensile test has a gage length of 2.0 in and an area = 0.5 in2. during the t...
Questions
question
Mathematics, 17.11.2020 23:10
question
Spanish, 17.11.2020 23:10
question
German, 17.11.2020 23:10
Questions on the website: 13722363