Engineering, 11.12.2019 19:31 jwbri

An emergency situation has arisen in the milling department, because the ship carrying a certain quantity of a required part from an overseas supplier sank on friday evening. a certain number of machines in the department must therefore be dedicated to the production of this part during the next week. a total of 1000 of these parts must be produced, and the production cycle time per part = 16.0 min. each milling machine used for this rush job must first be set up, which takes 5.0 hr. a scrap rate of 2% can be expected. assume availability = 100%.(a) if the production week consists of 10 shifts at 8.0 hr/shift, how many machines will be required? (b) it so happens that only two milling machines can be spared for this emergency job, due to other priority jobs in the department. to cope with the emergency situation, plant management has authorized a three-shift operation for six days next week. can the 1,000 replacement parts be completed within these constraints?

Answers: 2

Show answers

Another question on Engineering

Engineering, 03.07.2019 14:10

Amass of m 1.5 kg of steam is contained in a closed rigid container. initially the pressure and temperature of the steam are: p 1.5 mpa and t 240°c (superheated state), respectively. then the temperature drops to t2= 100°c as the result of heat transfer to the surroundings. determine: a) quality of the steam at the end of the process, b) heat transfer with the surroundings. for: p1.5 mpa and t 240°c: enthalpy of superheated vapour is 2900 kj/kg, specific volume of superheated vapour is 0. 1483 m/kg, while for t 100°c: enthalpy of saturated liquid water is 419kj/kg, specific volume of saturated liquid water is 0.001043m/kg, enthalpy of saturated vapour is 2676 kj/kg, specific volume of saturated vapour is 1.672 m/kg and pressure is 0.1 mpa.

Answers: 3

Answer

Engineering, 03.07.2019 19:30

When using the ohmmeter function of a digital multimeter, the leads are placed in what position relative to the component being tested? a. parallel b. control c. series d. line

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Afluid flows with a velocity field given by v=(x/t)i.. determine the local and convective accelerations when x=3 and t=1.

Answers: 2

Answer

Engineering, 04.07.2019 18:20

Describe one experiment in which the glass transition temperature and melting temperature of a totally amorphous thermoplastic material can be determined. show the relevant experimental results in a diagram which should be properly annotated with the two temperatures clearly marked. what is likely to happen to the curve in the diagram if the amorphous polymer is replaced by a thermosetting type?

Answers: 2

Answer

You know the right answer?

An emergency situation has arisen in the milling department, because the ship carrying a certain qua...

Questions