subject
Engineering, 11.12.2019 20:31 SmokeyRN

The hydraulic braking system for the truck and trailer is set to produce equal braking forces for the two units. if the brakes are applied uniformly for 4 seconds to bring the rig to a stop from a speed of 32 mi/hr down the 8-percent grade, determine the magnitude of the force p in the coupling between the trailer and the truck. the truck weighs 23,000 lb and the trailer weighs 19,000 lb. 32 mi/hr 100 p = lb the tolerance is +/-2%

ansver
Answers: 1

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.
Answers: 1
question
Engineering, 04.07.2019 18:10
Atmospheric air has a temperature (dry bulb) of 80° f and a wet bulb temperature of 60° f when the barometric pressure is 14.696 psia. determine the specific humidity, grains/lb dry air. a. 11.4 c. 55.8 d. 22.5 b. 44.1
Answers: 1
question
Engineering, 04.07.2019 18:20
Agas mixture consists of 8 kmol of h2 and 2 kmol of n2. determine the mass of each gas and the apparent gas constant of the mixture.
Answers: 3
question
Engineering, 04.07.2019 18:20
For each of the following process: a) sketch the p-v diagram, b)sketch t-s diagram, c) sketch t-v diagram, d) sketch the boundary work on one of the diagrams (a, b or c) and e) sketch the reversible heat transfer on one of the diagrams (a, b or c): 1- isobaric process from compressed liquid to superheated vapor 2- isothermal process from compressed liquid to superheated vapor 3- isentropic process from compressed liquid to superheated vapor
Answers: 3
You know the right answer?
The hydraulic braking system for the truck and trailer is set to produce equal braking forces for th...
Questions
question
Mathematics, 09.12.2020 04:00
question
Mathematics, 09.12.2020 04:00
Questions on the website: 13722362