The end c of the two-bar linkage rests on the top center of the 50-kg cylinder. if the coefficients of static friction at c and e are µc = 0.6 and µe = 0.3, determine the largest vertical force p which can be applied at b without causing motion. neglect the mass of the bars. hint: assume tipping of the cylinder

Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10

Inspection for bearing condition will include: (clo4) a)-color b)-smell c)-size d)-none of the above

Air is compressed isentropically from an initial state of 300 k and 101 kpa to a final temperature of 1000 k. determine the final pressure using the following approaches: (a) approximate analysis (using properties at the average temperature) (b) exact analysis