subject
Engineering, 11.12.2019 21:31 Apple557

You are inside a small (125 m3) laboratory, using liquid nitrogen at rate of 3 l/min from a large, insulated container. the liquid nitrogen expands as it evaporates, mixing with the air in the room (there is a fan that ensures that it is well-mixed), and all gases behave ideally. air leaves the room through a small crack in the door, such that the volume, pressure and temperature of the gas in the room all remain constant at 125 m3, 1 atm and 24°c, respectively. therefore, the mole fractions of nitrogen and oxygen are both time dependent. using the knowledge that the composition of normal air is 79% n2/21% o2, and that oxygen deprivation becomes a threat below 18% o2, calculate the maximum time (in minutes) that you can safely remain in the laboratory after starting the flow of nitrogen.

ansver
Answers: 1

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Aloaded platform of total mass 500 kg is supported by a dashpot and by a set of springs of effective stiffness 72 kn/m. it is observed that when the platform is depressed through a distance x = 12.5 cm below its equilibrium position and then released without any initial velocity; it reaches its equilibrium position in the shortest possible time without overshoot. find the position and velocity of the loaded platform 0.10 sec. after its release. if a further load of 400 kg is added to the platform, find, i) the frequency of damped vibrations, and i) the amplitude of vibration after 2 complete oscillations, given that the initial amplitude is 15 cm.
Answers: 1
question
Engineering, 04.07.2019 18:10
Acompressor receives the shaft work to decrease the pressure of the fluid. a)- true b)- false
Answers: 3
question
Engineering, 04.07.2019 18:10
Give heat transfer applications for the following, (i) gas turbines (propulsion) ) gas turbines (power generation). (iii) steam turbines. (iv) combined heat and power (chp). (v) automotive engines
Answers: 1
question
Engineering, 04.07.2019 18:10
Which of the following refers to refers to how well the control system responds to sudden changes in the system. a)-transient regulation b)- distributed regulation c)-constant regulation d)-steady-state regulation
Answers: 1
You know the right answer?
You are inside a small (125 m3) laboratory, using liquid nitrogen at rate of 3 l/min from a large, i...
Questions
question
Social Studies, 27.09.2019 03:00
question
Mathematics, 27.09.2019 03:00
question
Biology, 27.09.2019 03:00
Questions on the website: 13722363