subject
Engineering, 11.12.2019 22:31 roro2599

Multistep soda and lime are added to glass batch in the form of soda ash (na2co3) and limestone (caco3). during heating, these two ingredients decompose to give off carbon dioxide (co2), the resulting products being soda and lime. compute the weight of soda ash and limestone that must be added to 170 lbm of quartz (sio2) to yield a glass of composition 74 wt% sio2, 19 wt% na20, and 7 wt% cao. part 1 you are to compute the weight (in lbm) of soda ash and limestone that must be added to a certain amount of quartz to produce a particular glass composition. first, compute the lbm of both na2o and cao that is necessary for the particular glass composition that is given in the problem. what is the weight in lbm of: (a) na2o lbm (b) cao lbm click if you would like to show work for this question: open show work

ansver
Answers: 1

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10
Answers: 1
question
Engineering, 04.07.2019 18:10
Which of the following ziegler nichols tuning methods the response of the controller to a step input should exhibit an s-shaped curve? a)-open loop mode b)-closed loop mode c)-both modes (open & closed) d)-none of the modes (open & closed)
Answers: 3
question
Engineering, 04.07.2019 18:10
Which of the following controllers anticipates the future from the slope of errors over time? a)-proportional b)-on/off c)-integral d)-derivative.
Answers: 2
question
Engineering, 04.07.2019 18:20
Asimple rankine cycle uses water as the working fluid. the water enters the turbine at 10 mpa and 480c while the condenser operates at 6 kpa. if the turbine has an isentropic efficiency of 80 percent while the pump has an isentropic efficiency of 70 percent determine the thermal efficiency
Answers: 1
You know the right answer?
Multistep soda and lime are added to glass batch in the form of soda ash (na2co3) and limestone (cac...
Questions
question
Mathematics, 05.05.2020 11:09
Questions on the website: 13722361