subject
Engineering, 11.12.2019 23:31 achoward08

Given the strings s1 and s2, not necessarily of the same length, create a new string consisting of alternating characters of s1 and s2 (that is, the first character of s1 followed by the first character of s2, followed by the second character of s1, followed by the second character of s2, and so on. once the end of either string is reached, no additional characters are added. for example, if s1 contained "abc" and s2 contained "uvwxyz", then the new string should contain "aubvcw". assign the new string to the variable s3.

ansver
Answers: 1

Another question on Engineering

question
Engineering, 03.07.2019 14:10
The y form of iron is known as: a) ferrite b) cementite c) perlite d) austenite
Answers: 3
question
Engineering, 04.07.2019 18:10
An air conditioning system consist of a 5 cm diameter pipe, operating at a pressure of 200 kpa. the air initially enters the pipe at 15°c with a velocity of 20 m/s and relative humidity of 80%. if the heat supply throughout the process is 960 w, determine the relative humidity and the temperature at the outlet
Answers: 3
question
Engineering, 04.07.2019 18:10
Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10
Answers: 1
question
Engineering, 04.07.2019 18:10
Afour cylinder four-stroke in-line engine has a stroke of 160mm, connecting rod length of 150mm, a reciprocating mass of 3kg and its firing order is 1-3-4-2. the spacing between cylinders is 100mm. i. show that the engine is in balance with regard to the primary inertia forces and primary 3. a and secondary inertia couples. li determine the out of balance secondary inertia force ii. propose ways of balancing this out of balance force and discuss the challenges that will arise
Answers: 3
You know the right answer?
Given the strings s1 and s2, not necessarily of the same length, create a new string consisting of a...
Questions
question
Advanced Placement (AP), 31.10.2020 21:10
question
English, 31.10.2020 21:10
question
Mathematics, 31.10.2020 21:10
question
Mathematics, 31.10.2020 21:10
Questions on the website: 13722362