Engineering, 12.12.2019 01:31 perezsamantha3oqr0za
The bearings at a and d exert only y and z components offeree on the shaft. if ta)low = 60-mpa, determine to the nearest millimeter the smallest permissible outer diameter of the shaft. use the maximum-shearing-stress theory of failure.
Answers: 3
Engineering, 03.07.2019 14:10
If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.
Answers: 3
Engineering, 04.07.2019 16:10
The force on a cutting tool are 2600n vertically downward and 2100 horizontal. determine the resultant force acting on the tool and the angle at which it acts.
Answers: 1
Engineering, 04.07.2019 18:10
The drive force for diffusion is 7 fick's first law can be used to solve the non-steady state diffusion. a)-true b)-false
Answers: 1
Engineering, 04.07.2019 18:10
Apipe with an outside diameter of 15 cm is exposed to an ambient air and surrounding temperature of -20°c. the pipe has an outer surface temperature of 65°c and an emissivity of 0.85. if the rate of heat loss from the pipe surface is 0.95 kw per meter of length, the external convective heat transfer coefficient (h) is: (a) 12.5 w/m"k (b) 18.6 w/mk (c) 23.7 w/mk (d) 27.9 w/mk (e) 33.5 w/mk
Answers: 1
The bearings at a and d exert only y and z components offeree on the shaft. if ta)low = 60-mpa, dete...
Mathematics, 10.12.2021 06:20
Mathematics, 10.12.2021 06:20
Geography, 10.12.2021 06:20
Mathematics, 10.12.2021 06:20
Mathematics, 10.12.2021 06:20
Social Studies, 10.12.2021 06:20
Mathematics, 10.12.2021 06:20