subject
Engineering, 12.12.2019 02:31 mckinleesmomp6qj1e

Consider a solar panel system composed of 100 w modules (i. e., panels) that is coupled with a lead acid battery storage system to be used for a small business. you only plan to store electricity overnight. assume that the panels produce electrical energy 8 hours each day and that the electrical energy is used steadily throughout the day. size the system so that you can provide 48 kwh per day. the capacity factor of the solar panels is 15%. the voltage controller efficiency is 90%. the round trip efficiency is 78%. the depth of discharge is 80%. during the day when power is available from the panels it is provided directly to the house and is not stored in the batteries.

the cell efficiency is 17%. the installed cost of the system is $4.00/w including the pv panels, battery storage, inverters, and modifications to the house. the system has a solar access factor of 95%, a cleanliness factor of 98%, a temperature derate factor of 0.88, wiring and mismatch loss reduction factor 95%, an inverter efficiency of 90%, and a storage efficiency (i. e., round trip efficiency) of 95% based on input energy. assume that all power delivered by the system is provided through the batteries. solar insolation in the region average averages 250 w/m2 year round. the system may be purchased with a 20 year payback period at an interest rate of 6%. o& m costs are $0.01/kwh. the household has an annual electricity usage of 11,000 kwh. each panel requires 0.72 m2 of roof area.

how much power do the panels need to provide directly to the house (kwh/day)?

how much power do the panels need to provide to the batteries (kwh/day)?

what is the needed rated capacity of the solar panels (kw)?

ansver
Answers: 3

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Steel is coated with a thin layer of ceramic to protect against corrosion. what do you expect to happen to the coating when the temperature of the steel is increased significantly? explain.
Answers: 1
question
Engineering, 04.07.2019 18:10
Ariver flows from north to south at 8 km/h. a boat is to cross this river from west to east at a speed of 20 km/h (speed of the boat with respect to the earth/ground). at what angle (in degrees) must the boat be pointed upstream such that it will proceed directly across the river (hint: find the speed of the boat with respect to water/river)? a 288 b. 21.8 c. 326 d. 30.2
Answers: 3
question
Engineering, 04.07.2019 18:10
Adouble-strand no. 60 roller chain is used to transmit power between a 13-tooth driving sprocket rotating at 300 rev/min and a 52-tooth driven sprocket. a) what is the allowable horsepower of this drive? b) estimate the center-to-center distance if the chain length is 82 pitches. c) estimate the torque and bending force on the driving shaft by the chain if the actual horsepower transmitted is 30 percent less than the corrected (allowable) power.
Answers: 3
question
Engineering, 04.07.2019 18:10
The higher the astm grain-size number, the coarser the grain is. a)-true b)-false
Answers: 3
You know the right answer?
Consider a solar panel system composed of 100 w modules (i. e., panels) that is coupled with a lead...
Questions
question
Social Studies, 05.04.2020 02:24
question
Mathematics, 05.04.2020 02:25
question
Mathematics, 05.04.2020 02:25
question
Biology, 05.04.2020 02:26
question
Mathematics, 05.04.2020 02:26
Questions on the website: 13722360