Engineering, 14.12.2019 00:31 davialashay2458

An industrial wastewater treatment plant consists of a primary clarifier followed by a biological tower (trickling filter). the soluble bod concentration leaving the primary clarifier is 250 mg/l, and the corresponding flow rate is 1.0 million gals per day (mgd). the biological tower consists of a high-density, crossflow packing media with dimensions of 480 ft2 by 20 ft high. it has a specific area of 42.0 ft2 /ft3 , n = 0.5, and k20 = 0.0035 (gpm/ft2 ) 0.5. the recirculation ratio, r = 1.0; the water temperature is 15°c. calculate the soluble bod concentration in the biological tower effluent.

Answers: 2

Show answers

Another question on Engineering

Engineering, 03.07.2019 14:10

If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Refrigerant 134a enters an insulated compressor operating at steady state as saturated vapor at -26°c with a volumetric flow rate of 0.18 m3/s. refrigerant exits at 9 bar, 70°c. changes in kinetic and potential energy from inlet to exit can be ignored. determine the volumetric flow rate at the exit, in m3/s, and the compressor power, in kw.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Afluid flows with a velocity field given by v=(x/t)i.. determine the local and convective accelerations when x=3 and t=1.

Answers: 2

Answer

Engineering, 04.07.2019 18:10

For the closed feedwater heater below, feedwater enters state 3 at a pressure of 2000 psia and temperature of 420 °f at a rate of ix10 ibhr. the feedwat extracted steam enters state 1 at a pressure of 1000 psia and enthalpy of 1500 btu/lbm. the extracted er leaves at an enthalpy of 528.7 btu/lbm steam leaves as a saturated liquid. (16) a) determine the mass flow rate of the extraction steam used to heat the feedwater (10) b) determine the terminal temperature difference of the closed feedwater heater

Answers: 3

Answer

You know the right answer?

An industrial wastewater treatment plant consists of a primary clarifier followed by a biological to...

Questions