Engineering, 16.12.2019 20:31 extraemy

When a metal is heated, its density decreases. there are two sources that give rise to this decrease of p: (1) the thermalexpansion of the solid and [2) the formation of vacancies (section 4.2). consider a specimen of gold at room temperature(20°c) that has a density of 19.320 g/cm3.(a) determine its density upon heating to 800°c when only thermal expansion is considered.(b) repeat the calculation when the introduction of vacancies is taken into account assume that the energy of vacancyformation is 0.98 ev/atom, and that the volume coefficient of thermal expansion. av is equal to 30/.

Answers: 1

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10

Answers: 1

Answer

Engineering, 04.07.2019 18:10

An ideal otto cycle with air as the working fluid has a compression ratio of 8. the minimum and maximum temperatures in the cycle are 300 k and 1340 k. use constant specific heats at room temperature to determine (a) the amount of heat transferred to the air during the heat- addition kj/kg, (b) the thermal efficiency, and (c) the thermal efficiency of a carnot cycle ope limits. process, in rating between the same temperature

Answers: 2

Answer

Engineering, 04.07.2019 18:20

Vibration monitoring this technique uses the noise or vibration created by mechanical equipment and in seme cases by plant systems to detemine their actual condtion. a)- true b)- false

Answers: 2

Answer

Engineering, 04.07.2019 18:20

Prove the equivalence between the two statements of the 2nd law of thermodynamics (i.e., a violation of one statement leads to the violatio the other statement)

Answers: 2

Answer

You know the right answer?

When a metal is heated, its density decreases. there are two sources that give rise to this decrease...

Questions