Engineering, 17.12.2019 01:31 ashlynmartinezoz2eys

Acontinuous and aligned fiber reinforced composite having a cross-sectional area of 1130 mm 2 (1.75 in. 2 ) is subjected to an external tensile load.

if the stresses sustained by the fiber and matrix phases are 156 mpa (22,600 psi) and 2.75 mpa (400 psi), respectively, the force sustained by the fiber phase is 74,000 n (16,600 lb f ), and the total longitudinal strain is 1.25x10 −3, determine the following: (a) the force sustained by the matrix phase(b) the modulus of elasticity of the composite material in the longitudinal direction(c) the moduli of elasticity for fiber and matrix phases

Answers: 1

Show answers

Another question on Engineering

Engineering, 03.07.2019 15:10

Apiston-cylinder with a volume of 0.25 m3 holds 1 kg of air (r 0.287 k/kgk) at a temperature of 100 c. heat transfer to the cylinder causes an isothermal expansion of the piston until the volume triples. how much heat is added to the piston-cylinder?

Answers: 3

Answer

Engineering, 04.07.2019 16:10

The force on a cutting tool are 2600n vertically downward and 2100 horizontal. determine the resultant force acting on the tool and the angle at which it acts.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

An air conditioning system consist of a 5 cm diameter pipe, operating at a pressure of 200 kpa. the air initially enters the pipe at 15°c with a velocity of 20 m/s and relative humidity of 80%. if the heat supply throughout the process is 960 w, determine the relative humidity and the temperature at the outlet

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Afour cylinder four-stroke in-line engine has a stroke of 160mm, connecting rod length of 150mm, a reciprocating mass of 3kg and its firing order is 1-3-4-2. the spacing between cylinders is 100mm. i. show that the engine is in balance with regard to the primary inertia forces and primary 3. a and secondary inertia couples. li determine the out of balance secondary inertia force ii. propose ways of balancing this out of balance force and discuss the challenges that will arise

Answers: 3

Answer

You know the right answer?

Acontinuous and aligned fiber reinforced composite having a cross-sectional area of 1130 mm 2 (1.75...

Questions