Engineering, 17.12.2019 01:31 moose12002

In a vapor-compression refrigeration cycle, ammonia exits the evaporator as saturated vapor at -22°c. the refrigerant enters the condenser at 16 bar and 160°c, and saturated liquid exits at 16 bar. there is no significant heat transfer between the compressor and its surroundings, and the refrigerantpasses through the evaporator with a negligible change in pressure. if the refrigerating capacity is 150kw, determine: (a) the mass flow rate of the refrigerant, in kg/s.(b) the power input to the compressor, in kw.(c) the coefficient of performance.(d) the isentropic compressor efficiency(e) the rate of entropy production, in kw/k, for the compressor.

Answers: 3

Show answers

Another question on Engineering

Engineering, 03.07.2019 15:10

Two flowing streams of argon gas are adiabatically mixed to form a single flow/stream. one stream is 1.5 kg/s at 400 kpa and 200 c while the second stream is 2kg/s at 500 kpa and 100 ? . it is stated that the exit state of the mixed single flow of argon gas is 150 c and 300 kpa. assuming there is no work output or input during the mixing process, does this process violate either the first or the second law or both? explain and state all your assumptions.

Answers: 1

Answer

Engineering, 04.07.2019 19:10

When subject to a steady load (within elastic range) over a long period of time, what is the major difference in material behavoir between steel and plastic?

Answers: 2

Answer

Engineering, 04.07.2019 19:10

An engine, weighing 3000 n, is supported on a pedestal mount. it has been observed that the engine induces vibration into the surrounding area through its pedestal at the maximum operating speed. determine the stiffness of the dynamic vibration absorber spring in (n/m) that will reduce the vibration when mounted on the pedestal. the magnitude of the exciting force is 250 n, and the amplitude of motion of the auxiliary mass is to be limited to 2 mm note: in this question type-in right numbers, no decimals, no fractions, no unit. approximate to right number if needed

Answers: 3

Answer

Engineering, 04.07.2019 19:20

Heat transfer by is the fastest mode of heat transfer that requires no intervening medium. a)-conduction b)-convection c)-radiation d)-conduction and convection

Answers: 1

Answer

You know the right answer?

In a vapor-compression refrigeration cycle, ammonia exits the evaporator as saturated vapor at -22°c...

Questions