subject
Engineering, 17.12.2019 01:31 NotAPDB1441

From the niebel's methods, standards, and work design 13th editon textbook chapter #14 problem #1:

1.) the analyst in the dorben reference library decides to use the work sampling technique to establish standards. twenty employees are involved. the operations include cataloging, charging books out , returning books to their proper location, cleaning books, record keeping, packing books for shipment, and handling correspondence. a preliminary investigation resulted in the estimate that 30 percent of the group's time was spent in cataloging. how many work sampling observations would be made if it were desirable to be 95 percent confident that the observed data were within a tolerance of +/- 10 percent of the population data? describe how the random observations should be made. the following table illustrates some of the data gathered from 6 of the 20 employees. the number of volumes cataloged equals 14,612. from these data, determine standard, in hours per hundred, for cataloging. then design a control chart based on +/- 3 sigma limits for the daily observations. operators

item smith apple brown green baird thomas

total hours worked 78 80 80 65 72 75
total observations (all elements) 152 170 181 114 143 158
observations involving cataloging 50 55 48 29 40 45
average rating 90 95 105 85 90 100

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Water at 55c flows across a flat plate whose surface temperature is held constant at 95c. if the temperature gradient at the plate's surface for a given value of x is 18 c/mm, find a) local heat transfer coefficient. b) heat flux
Answers: 3
question
Engineering, 04.07.2019 18:10
Which one from below is not one of the reasons of planning failures? (clo3) a)-planner is careless. b-planner spend less time in the field but more time on the desk c)-planner is not qualified d)-planner does not have sufficient time to properly plan
Answers: 3
question
Engineering, 04.07.2019 18:20
Vibration monitoring this technique uses the noise or vibration created by mechanical equipment and in seme cases by plant systems to detemine their actual condtion. a)- true b)- false
Answers: 2
question
Engineering, 04.07.2019 18:20
Asolid cylinder is concentric with a straight pipe. the cylinder is 0.5 m long and has an outside diameter of 8 cm. the pipe has an inside diameter of 8.5 cm. the annulus between the cylinder ad the pipe contains stationary oil. the oil has a specific gravity of 0.92 and a kinematic viscosity of 5.57 x 10-4 m2/s. most nearly, what is the force needed to move the cylinder along the pipe at a constant velocity of 1 m/s?
Answers: 3
You know the right answer?
From the niebel's methods, standards, and work design 13th editon textbook chapter #14 problem #1: <...
Questions
question
Mathematics, 05.03.2021 17:50
question
Mathematics, 05.03.2021 17:50
question
Mathematics, 05.03.2021 17:50
Questions on the website: 13722361