Engineering, 17.12.2019 05:31 taehyungg

)steam (6000 kg/h, 10 bar, 400oc) is passed through an adiabatic turbine that drives a shaft to generate power. the steam leaving the turbine is at 0.5 bar and passes to a chiller where heat is removed at the rate of 1.25 x 107 kj/h. saturated liquid leaves the chiller at 0.5 bar.
how much work (kw) is produced in the turbine?
what is the quality of steam leaving the turbine? sometimes, steam produced is ‘wet’ in nature, and is composed of saturated water vapor and entrained water droplets. in such cases, quality is defined as the fraction of steam that is vapor.
i haven't been able to get this as the final answer.

final (a) 1400 kw; (b) 0.9

Answers: 2

Show answers

Another question on Engineering

Engineering, 03.07.2019 15:10

Heat is added to a piston-cylinder device filled with 2 kg of air to raise its temperature 400 c from an initial temperature of t1 27 cand pressure of pi 1 mpa. the process is isobaric process. find a)-the final pressure p2 b)-the heat transfer to the air.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Apump is used to circulate hot water in a home heating system. water enters the well-insulated pump operating at steady state at a rate of 0.42 gal/min. the inlet pressure and temperature are 14.7 lbf/in.2, and 180°f, respectively; at the exit the pressure is 60 lbf/in.2 the pump requires 1/15 hp of power input. water can be modeled as an incompressible substance with constant density of 60.58 lb/ft3 and constant specific heat of 1 btu/lb or. neglecting kinetic and potential energy effects, determine the temperature change, in °r, as the water flows through the pump.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Determine whether or not it is possible to compress air adiabatically from k to 140 kpa and 400 k. what is the entropy change during this process?

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Atmospheric air has a temperature (dry bulb) of 80° f and a wet bulb temperature of 60° f when the barometric pressure is 14.696 psia. determine the specific humidity, grains/lb dry air. a. 11.4 c. 55.8 d. 22.5 b. 44.1

Answers: 1

Answer

You know the right answer?

)steam (6000 kg/h, 10 bar, 400oc) is passed through an adiabatic turbine that drives a shaft to gene...

Questions