subject
Engineering, 17.12.2019 07:31 straightbarz8901

The xyz corporation has been advised by a state pollution control authority that it has 60 days to apply for a permit to discharge manufacturing wastes into a receiving body of water. xyz is also advised of the minimum standard for water quality in the receiving body that must be met. in an effort to convince the authority that the receiving body of water after receiving the manufacturing wastes will still meet established environmental standards, the corporation employs engineer doe to perform consulting engineering services and submit a detailed report. after completion of his studies but before completion of any written report, doc concludes that the discharge from the plant will lower the quality of the receiving body of water below established standards. he further concludes that corrective action will be very costly. doc verbally advises the xyz corporation of his findings. subsequently, the corporation terminates the contract with doe with full payment for services performed, and instructs doe not to render a written report to the corporation. thereafter. doe learns that the authority has called a public hearing and that the xyz corporation has presented data to support its view that the present discharge meets minimum. doc have an ethical obligation to report his findings to the authority upon learning of the ring? explain your reasoning.

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Water at 55c flows across a flat plate whose surface temperature is held constant at 95c. if the temperature gradient at the plate's surface for a given value of x is 18 c/mm, find a) local heat transfer coefficient. b) heat flux
Answers: 3
question
Engineering, 04.07.2019 18:10
A-mn has a cubic structure with a0 0.8931 nm and a density of 7.47 g/cm3. b-mn has a different cubic structure, with a0 0.6326 nm and a density of 7.26 g/cm3. the atomic weight of manganese is 54.938 g/mol and the atomic radius is 0.112 nm. determine the percent volume change that would occur if a-mn transforms to b-mn.
Answers: 2
question
Engineering, 04.07.2019 18:20
Select any two (2) areas of applications of chain-drive. (clo4) a)-permanent lubrication necessary b)-hydraulic forklift truck operation c)-rigging and heavy moving materials d)-relatively high maintenance costs e)-costlier than belt drives
Answers: 2
question
Engineering, 04.07.2019 18:20
Steam enters a converging nozzle at 3.0 mpa and 500°c with a at 1.8 mpa. for a nozzle exit area of 32 cm2, determine the exit velocity, mass flow rate, and exit mach number if the nozzle: negligible velocity, and it exits (a) is isentropic (b) has an efficiency of 94 percent
Answers: 2
You know the right answer?
The xyz corporation has been advised by a state pollution control authority that it has 60 days to a...
Questions
question
Chemistry, 03.03.2021 07:50
question
Mathematics, 03.03.2021 07:50
question
Arts, 03.03.2021 07:50
Questions on the website: 13722361