subject
Engineering, 18.12.2019 05:31 azolber

Atherosclerosis is narrowing of the arteries caused by the accumulation of fatty deposits on the arterial walls. on june 22, 2002, the st. louis cardinals were preparing for their upcoming baseball game against the chicago cubs. concern arose when their prized pitcher, 33-year old darryl kile did not show up for practice. soon after, he was found still in his hotel room where he had suddenly died in his sleep (new york times, 2002). it was discovered that the cause of death was related to three of his coronary arteries being 80–90% blocked as a result of atherosclerosis (new york times, 2002), which ultimately caused him to suffer a heart attack. answer the following 3 questions in regard to this case study: provide a description of how the heart functions. based on this, explain why atherosclerosis would result in a heart attack. how are arteries different from veins and capillaries? describe the functions of arteries, veins, and capillaries. vertebrates and some invertebrates have a closed circulatory system. describe each of these. explain the advantage of having a closed circulatory system over an open circulatory system.

ansver
Answers: 3

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Afour cylinder four-stroke in-line engine has a stroke of 160mm, connecting rod length of 150mm, a reciprocating mass of 3kg and its firing order is 1-3-4-2. the spacing between cylinders is 100mm. i. show that the engine is in balance with regard to the primary inertia forces and primary 3. a and secondary inertia couples. li determine the out of balance secondary inertia force ii. propose ways of balancing this out of balance force and discuss the challenges that will arise
Answers: 3
question
Engineering, 04.07.2019 18:10
Ifa component is made of two or more materials with different modulus of elasticity (e), it is called a composite member and we calculate the factor·n". mention the formula for calculating n". also, ifn> 1, explain what will happen to the 1. transformed.gi) ifn 1, what will happen to the material when transformed material when
Answers: 1
question
Engineering, 04.07.2019 18:20
Inspection for bearing condition will include: (clo4) a)-color b)-smell c)-size d)-none of the above
Answers: 1
question
Engineering, 04.07.2019 19:10
Afoot bridge is made as a simple deck, 4 m long, with a cross section 2 m (wide) and 20 cm thick, and made of wood. the deck is supported at the two ends. the maximum load allowable on the bridge is 10 tons, provided it is uniformly distributed on the deck. to sense this load, a strain gauge is placed at the center of the bridge and its resistance is monitored. if the sensor has a nominal resistance of 350 s2 and a gauge factor of 3.6, what is the reading of the strain gauge at maximum load? the modulus of elasticity for the wood used in the construction is 10 gpa.
Answers: 2
You know the right answer?
Atherosclerosis is narrowing of the arteries caused by the accumulation of fatty deposits on the art...
Questions
Questions on the website: 13722367