Engineering, 18.12.2019 05:31 justinb0829
Aresistance spot welding operation is performed on two pieces of 0.040 in thick sheet steel with unit melting energy of 150 btu/in3. it takes 9500 a and 0.17 sec to complete a weld nugget of φ0.190 in and 0.060 in thick.
assume the resistance of 100 micro-ohms. a) calculate the average power density in the interface area defined by the weld nuggetb) find the percentage of energy generated that went into formation of the weld nugget (i. e, calculate the ratio eweld / esource)
Answers: 1
Another question on Engineering
Engineering, 04.07.2019 16:10
The force on a cutting tool are 2600n vertically downward and 2100 horizontal. determine the resultant force acting on the tool and the angle at which it acts.
Answers: 1
Engineering, 04.07.2019 18:20
Athin walled concentric tube exchanger is used to cool engine oil from 160°c to 60°c with water that is available at 25°c acting as a coolant. the oil and water flow rates are each at 2 kg/s, and the diameter of the inner tube is 0.5 m and the corresponding value of the overall heat transfer coefficient is 250 w/m2. oc. how long must the heat exchanger be to accomplish the desired cooling? cpwater=4.187 kj/kg-candcpengine el=2.035 kj/kg·°c, oil . 120]
Answers: 1
Engineering, 06.07.2019 02:30
Air (c-1.006 kj/kg.k, r-0.287 kj/kg.k) enters a nozzle steadily at 280 kpa and 77°c with a velocity of 50 m/s and exits at 85 kpa and 320 m/s. the heat losses from the nozzle to the surrounding medium at 20°c are estimated to be 3.2 kj/kg. determine (a) the exit temperature and (b) the total entropy change for this process. solve this problem using constant specific heats.
Answers: 1
Engineering, 06.07.2019 03:20
Avertical steel rod of length 2.0 m and diameter 25 mm is rigidly fixed at its upper end and has a flange at its lower, free, end. what will be the maximum stress produced in the rod when a load of 20 kn is applied, (a) gradually to the lower end, (b) suddenly to the lower end, (c) by a collar falling from a height of 50 mm on to the flange?
Answers: 3
You know the right answer?
Aresistance spot welding operation is performed on two pieces of 0.040 in thick sheet steel with uni...
Questions
English, 02.04.2021 17:00
Mathematics, 02.04.2021 17:00
Biology, 02.04.2021 17:00
Mathematics, 02.04.2021 17:00
Social Studies, 02.04.2021 17:00
History, 02.04.2021 17:00
Mathematics, 02.04.2021 17:00
Mathematics, 02.04.2021 17:00
English, 02.04.2021 17:00
