subject
Engineering, 19.12.2019 04:31 marciekinser

Rectification of a heptane–ethyl benzene mixture. a saturated liquid feed of 200 mol/h at the boiling point containing 42 mol % heptane and 58% ethyl benzene is to be fractionated at 101.32 kpa abs to give a distillate containing 97 mol % heptane and a bottoms containing 1.1 mol % heptane. the reflux ratio used is 2.5: 1. calculate the mol/h distillate, mol/h bottoms, theoretical number of trays, and the feed tray number. equilibrium data are given below at 101.32 kpa abs pressure for the mole fraction n-heptane h and yh:

ansver
Answers: 1

Another question on Engineering

question
Engineering, 03.07.2019 15:10
Apiston-cylinder with a volume of 0.25 m3 holds 1 kg of air (r 0.287 k/kgk) at a temperature of 100 c. heat transfer to the cylinder causes an isothermal expansion of the piston until the volume triples. how much heat is added to the piston-cylinder?
Answers: 3
question
Engineering, 04.07.2019 08:10
Which of the following is an easy way to remember the modified “x” tire rotation? a. nondrive wheels straight, cross the drive wheels b. drive wheels straight, cross the nondrive wheels c. drive wheels crossed, nondrive wheels straight d. drive wheels crossed, nondrive wheels crossed
Answers: 1
question
Engineering, 04.07.2019 18:10
Which of the following components of a pid controlled accumulates the error over time and responds to system error after the error has been accumulated? a)- proportional b)- derivative c)- integral d)- on/off.
Answers: 2
question
Engineering, 04.07.2019 18:10
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
You know the right answer?
Rectification of a heptane–ethyl benzene mixture. a saturated liquid feed of 200 mol/h at the boilin...
Questions
question
Physics, 03.12.2020 06:40
Questions on the website: 13722359