Engineering, 20.12.2019 18:31 DavidSuperior3475

Acurved beamis subject to bending and torsional loading. the beam is of circularcross section of diameter 40 mm. the centerof curvature is 100 mm from the centroidal axis of the cross-section. at thecritical cross-section, the bending moment is 150 n. m and the torsional moment is 370 n. m.in addition, an axial force reaction of 15kn also acts at the cross section. the beam is made of ductile aluminumalloy of yield strength in tension of 130 mpa and yield strength in compression of 190 mp. calculate the distance between the centroidal and neutral axis:

Answers: 1

Show answers

Another question on Engineering

Engineering, 03.07.2019 14:10

Explain the difference laminar and turbulent flow. explain it with the shear stress and the velocity profiles.

Answers: 1

Answer

Engineering, 03.07.2019 15:10

Two flowing streams of argon gas are adiabatically mixed to form a single flow/stream. one stream is 1.5 kg/s at 400 kpa and 200 c while the second stream is 2kg/s at 500 kpa and 100 ? . it is stated that the exit state of the mixed single flow of argon gas is 150 c and 300 kpa. assuming there is no work output or input during the mixing process, does this process violate either the first or the second law or both? explain and state all your assumptions.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

An air compression refrigeration system is to have an air pressure of 100 psia in the brine tank and an allowable air temperature increase of 60°f for standard vapor compression cycle temperatures of 77 f entering the expansion cylinder and 14 f entering the compression cylinder, calculate the coefficient of performance a. 2.5 b 3.3 c. 4.0 d. 5.0

Answers: 3

Answer

Engineering, 04.07.2019 18:20

Describe one experiment in which the glass transition temperature and melting temperature of a totally amorphous thermoplastic material can be determined. show the relevant experimental results in a diagram which should be properly annotated with the two temperatures clearly marked. what is likely to happen to the curve in the diagram if the amorphous polymer is replaced by a thermosetting type?

Answers: 2

Answer

You know the right answer?

Acurved beamis subject to bending and torsional loading. the beam is of circularcross section of dia...

Questions