subject
Engineering, 20.12.2019 20:31 danielcano12281621

Atwo-dimensional source is placed in a uniform flow of velocity 2 m/s in the x-direction. the volume flow rate issuing from the source is 4 m3/s per meter.

(a) find the location of the stagnation point.

(b) sketch the body shape passing through the stagnation point.

(c) find the width of the body.

(d) find the maximum and minimum pressures on the body when the pressure in the uniform flow is atmospheric. the fluid is air and its temperature is 20 °c

ansver
Answers: 1

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Fluids at rest possess no flow energy. a)- true b)- false
Answers: 3
question
Engineering, 04.07.2019 18:10
Which of the following components of a pid controlled accumulates the error over time and responds to system error after the error has been accumulated? a)- proportional b)- derivative c)- integral d)- on/off.
Answers: 2
question
Engineering, 04.07.2019 19:20
The power source in a certain welding setup generates 3500w that is transferred to the low carbon steel work with a heat transfer factor of 0.85. the melting factor in the operation is 0.45. a continuous fillet weld is to be made with a cross-sectional area of 23 mm2 determine the travel speed at which the welding can be accomplished.
Answers: 3
question
Engineering, 04.07.2019 19:20
Apreheater involves the use of condensing steam at 100°c on the inside of a bank of tubes to heat air that enters at 1 atm and 25°c. the air moves at 5 m/s in cross flow over the tubes. each tube is 1 m long and has an outside diameter of 10 mm. what is the minimum value of nl needed to achieve an outlet temperature of t 75 c? what is the corresponding pressure drop across the tube bank?
Answers: 3
You know the right answer?
Atwo-dimensional source is placed in a uniform flow of velocity 2 m/s in the x-direction. the volume...
Questions
question
Mathematics, 06.07.2021 21:30
Questions on the website: 13722363