Engineering, 21.12.2019 01:31 prohrer589

Ethylene glycol at 20°c flows through 55 meters of cast iron pipe of diameter 6 cm. the measured pressure drop is 250 kpa. neglect minor losses. using a non-iterative formulation, estimate the flow rate in m^3/h.
for ethylene glycol at 20°c, take rho = 1117 kg/m^3 and μ = 0.0214 kg/ms. for cast iron, take ε = 0.26 mm. take π = 22/7. round the answer to one decimal place.

Answers: 2

Show answers

Another question on Engineering

Engineering, 03.07.2019 14:10

Line joining liquid phase with liquid and solid phase mixture is known as: a) liquidus b) solidus c) tie line d) none of the mentioned

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Ajournal bearing has a journal diameter of 3.250 in with a unilateral tolerance of 20.003 in. the bushing bore has a diameter of 3.256 in and a unilateral tolerance of 0.004 in. the bushing is 2.8 in long and supports a 700-lbf load. the journal speed is 900 rev/min. find the minimum oil film thickness and the maximum film pressure for both sae 20 and sae 20w-30 lubricants, for the tightest assembly if the operating film temperature is 160°f. a computer code is appropriate for solving this problem.

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Items are similar to the free issue items, but their access is limited. (clo5) a)-bin stock items free issue b)-bin stock controlled issue c)-critical or insurance spares d)-rebuildable spares e)-consumables

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Which of the following ziegler nichols tuning methods the response of the controller to a step input should exhibit an s-shaped curve? a)-open loop mode b)-closed loop mode c)-both modes (open & closed) d)-none of the modes (open & closed)

Answers: 3

Answer

You know the right answer?

Ethylene glycol at 20°c flows through 55 meters of cast iron pipe of diameter 6 cm. the measured pre...

Questions