Engineering, 24.12.2019 04:31 toribrown3773

Ashaft of diameter 2.2-in has a groove where the diameter reduces to 2.0-in. the radius of the fillet at the groove is 0.1-in. the shaft carries a bending moment which varies between 5500 b. in to 11 kip. in. using modified-goodman and soderberg criteria find safety factor at the bottom-most point in the groove for a life of 250,000 cycles if the shaft is made of steel of ultimate strength 120 ksi and yield strength 85 ksi. also find the langer yield safety factor as part of the first cycle yield check. ignore transverse shear stress. a. max and min bending stresses without considering the effect of stress concentration. b. midrange stress and stress amplitude. c. static stress concentration factors d. fatigue strength at 250,000 cycles, e. safety factors using modified goodman and soderberg criteria. f. first cycle yield safety check.

Answers: 2

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Which from the following instrument is commonly used to detect the high pitch butzing sound in bearings? [clo4] a)-digital ultrasonic meter b)-infrared camera c)-spectroscopic d)-vibrometer

Answers: 2

Answer

Engineering, 04.07.2019 18:20

Avolume of 2.65 m3 of air in a rigid, insulated container fitted with a paddle wheel is initially at 264 k, 5.6 bar. the air receives 432 kj by work from the paddle wheel. assuming the ideal gas model with cv = 0.71 kj/kg • k, determine for the air the amount of entropy produced, in kj/k

Answers: 2

Answer

Engineering, 04.07.2019 19:10

Ahelical coil spring has a mean diameter of 50 mm, a wire diameter of 5.5 mm and is wound with a pitch of 10 mm. the spring steel has an ultimate strength of 1250 mpa. find the force needed to compress the spring solid and the wire stress in this condition. state whether the spring will return to its initial length.

Answers: 1

Answer

Engineering, 04.07.2019 19:20

A5 kg block of fe is dropped into a very large vat of water. the fe and water initial temperatures are 95 and 25 c, respectively. the fe final temperature is 25 c and the water can be treated as a thermal reservoir,. treated as a thermal reservoir take the water to be the system and determine the entropy generation. report vour answer in kj/k.

Answers: 1

Answer

You know the right answer?

Ashaft of diameter 2.2-in has a groove where the diameter reduces to 2.0-in. the radius of the fille...

Questions