subject
Engineering, 24.12.2019 05:31 veroushkarose7326

Aroom is to be heated by a coal-burning stove, which is a cylindrical cavity with an outer diameter of 50 cm and a height of 120 cm. the rate of heat loss from the room is estimated to be 1.5 kw when the air temperature in the room is maintained constant at 24°c. the emissivity of the stove surface is 0.85, and the average temperature of the surrounding wall surfaces is 14°c. determine the surface temperature of the stove. neglect the heat transfer from the bottom surface and take the heat transfer coefficient at the top surface to be the same as that on the side surface. the heating value of the coal is 30,000 kj/kg, and the combustion efficiency is 65 percent. determine the amount of coal burned in a day if the stove operates 14 h a day. evaluate air properties at a film temperature of 77°c and 1 atm pressure. is this a good assumption?

ansver
Answers: 2

Another question on Engineering

question
Engineering, 03.07.2019 14:10
Amass of 1.5 kg of air at 120 kpa and 24°c is contained in a gas-tight, frictionless piston-cylinder device. the air is now compressed to a final pressure of 720 kpa. during the process, heat is transferred from the air such that the temperature inside the cylinder remains constant. calculate the boundary work input during this process.
Answers: 2
question
Engineering, 04.07.2019 18:10
Ariver flows from north to south at 8 km/h. a boat is to cross this river from west to east at a speed of 20 km/h (speed of the boat with respect to the earth/ground). at what angle (in degrees) must the boat be pointed upstream such that it will proceed directly across the river (hint: find the speed of the boat with respect to water/river)? a 288 b. 21.8 c. 326 d. 30.2
Answers: 3
question
Engineering, 04.07.2019 18:10
Give heat transfer applications for the following, (i) gas turbines (propulsion) ) gas turbines (power generation). (iii) steam turbines. (iv) combined heat and power (chp). (v) automotive engines
Answers: 1
question
Engineering, 04.07.2019 18:10
The thermal expansion or contraction of a given metal is a function of the f a)-density b)-initial temperature c)- temperature difference d)- linear coefficient of thermal expansion e)- final temperature f)- original length
Answers: 2
You know the right answer?
Aroom is to be heated by a coal-burning stove, which is a cylindrical cavity with an outer diameter...
Questions
question
Mathematics, 04.07.2020 05:01
Questions on the website: 13722367