subject
Engineering, 24.12.2019 06:31 gldven7636

A0.1 mole% caustic soda (naoh) solution is to be concentrated in a continuous evaporator. the solution enters the unit at 25°c at a rate of 150 mol/min and is concentrated to 5 mole% at 60°c. hot dry air at 200°c and 1.1 bar absolute is bubbled through the evaporator and leaves saturated with water at 60°c and 1 atm. calculate the required volumetric flow rate of the entering air and the rate at which heat must be transferred to or from the unit. assume that the heat capacity per unit mass of all liquid solutions is that of pure water

ansver
Answers: 3

Another question on Engineering

question
Engineering, 03.07.2019 14:10
Amass of m 1.5 kg of steam is contained in a closed rigid container. initially the pressure and temperature of the steam are: p 1.5 mpa and t 240°c (superheated state), respectively. then the temperature drops to t2= 100°c as the result of heat transfer to the surroundings. determine: a) quality of the steam at the end of the process, b) heat transfer with the surroundings. for: p1.5 mpa and t 240°c: enthalpy of superheated vapour is 2900 kj/kg, specific volume of superheated vapour is 0. 1483 m/kg, while for t 100°c: enthalpy of saturated liquid water is 419kj/kg, specific volume of saturated liquid water is 0.001043m/kg, enthalpy of saturated vapour is 2676 kj/kg, specific volume of saturated vapour is 1.672 m/kg and pressure is 0.1 mpa.
Answers: 3
question
Engineering, 03.07.2019 15:10
Ahouse has the following electrical appliance usage (1) single 40w lamp used for 4 hours per day (2) single 60w fan used for 12 hours per day (3) single 200w refrigerator that runs 24 hours per day with compressor run 12 hours and off 12 hours find the solar power inverter size in watt with correction factor of 1.25.
Answers: 1
question
Engineering, 04.07.2019 18:10
Journeyman training is usually related (clo2) a)-to specific tasks b)-to cost analysis of maintenance task c)-to control process to ensure quality d)-to installation of machinery
Answers: 2
question
Engineering, 04.07.2019 18:20
Steam enters a converging nozzle at 3.0 mpa and 500°c with a at 1.8 mpa. for a nozzle exit area of 32 cm2, determine the exit velocity, mass flow rate, and exit mach number if the nozzle: negligible velocity, and it exits (a) is isentropic (b) has an efficiency of 94 percent
Answers: 2
You know the right answer?
A0.1 mole% caustic soda (naoh) solution is to be concentrated in a continuous evaporator. the soluti...
Questions
question
English, 19.12.2020 01:00
question
Mathematics, 19.12.2020 01:00
question
Mathematics, 19.12.2020 01:00
question
World Languages, 19.12.2020 01:00
question
Mathematics, 19.12.2020 01:00
Questions on the website: 13722363