Engineering, 27.12.2019 05:31 ericavasquez824

Apipe with closed ends has a wall thickness of 10 mm and an inner diameter of 0.60 m. it filled with a gas at 20 mpa pressure and subjected to a torque about its long axis of 1200 kn·m. a. determine the three principal normal stresses and the maximum shear stress. recall from basic mechanics that: = t / b. if the pipe is constructed of oil-quenched and tempered 4340 steel with a yield strength of 1620 mpa, what is the safety factor against yielding using the tresca maximum shear stress criterion? c. prior to loading, an inside crack is discovered through 25% of the thickness of the sample. with this crack, what is the safety factor against fracture if the plane strain fracture toughness is 87.4mpa√m?

Answers: 1

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

A-mn has a cubic structure with a0 0.8931 nm and a density of 7.47 g/cm3. b-mn has a different cubic structure, with a0 0.6326 nm and a density of 7.26 g/cm3. the atomic weight of manganese is 54.938 g/mol and the atomic radius is 0.112 nm. determine the percent volume change that would occur if a-mn transforms to b-mn.

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Condition monitoring is a major component of. (clo4) a)- predictive maintenance. b)-preventive maintenance c)-proactive maintenance d)-reactive maintenance.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

An air compression refrigeration system is to have an air pressure of 100 psia in the brine tank and an allowable air temperature increase of 60°f for standard vapor compression cycle temperatures of 77 f entering the expansion cylinder and 14 f entering the compression cylinder, calculate the coefficient of performance a. 2.5 b 3.3 c. 4.0 d. 5.0

Answers: 3

Answer

Engineering, 04.07.2019 18:20

Steam enters a converging nozzle at 3.0 mpa and 500°c with a at 1.8 mpa. for a nozzle exit area of 32 cm2, determine the exit velocity, mass flow rate, and exit mach number if the nozzle: negligible velocity, and it exits (a) is isentropic (b) has an efficiency of 94 percent

Answers: 2

Answer

You know the right answer?

Apipe with closed ends has a wall thickness of 10 mm and an inner diameter of 0.60 m. it filled with...

Questions