subject
Engineering, 28.12.2019 01:31 yfgkeyonna

Show, by calculating net work and heat supplied, that for a carnot heat engine using air as a working medium, the carnot efficiency is \eta _{c}=1-t_{l}/t_{h} . a carnot heat engine cycle is executed in a closed system using 0.5 kg as a working fluid. initially the air is at a pressure of 100 kpa and a specific volume of 1 m3/kg and the maximum pressure in the cycle is 2,500 kpa. determinea) the carnot efficiencyb) the amount of work output if the specific volume increases during heat addition by a factor of 5.

ansver
Answers: 1

Another question on Engineering

question
Engineering, 03.07.2019 14:10
If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.
Answers: 3
question
Engineering, 04.07.2019 18:20
Athin walled concentric tube exchanger is used to cool engine oil from 160°c to 60°c with water that is available at 25°c acting as a coolant. the oil and water flow rates are each at 2 kg/s, and the diameter of the inner tube is 0.5 m and the corresponding value of the overall heat transfer coefficient is 250 w/m2. oc. how long must the heat exchanger be to accomplish the desired cooling? cpwater=4.187 kj/kg-candcpengine el=2.035 kj/kg·°c, oil . 120]
Answers: 1
question
Engineering, 04.07.2019 18:20
Avolume of 2.65 m3 of air in a rigid, insulated container fitted with a paddle wheel is initially at 264 k, 5.6 bar. the air receives 432 kj by work from the paddle wheel. assuming the ideal gas model with cv = 0.71 kj/kg • k, determine for the air the amount of entropy produced, in kj/k
Answers: 2
question
Engineering, 04.07.2019 19:10
The short distance from the objective lens to the object causes problems at high magnification. which of the following is the most serious? a. cleaning the object surface b. positioning the object c. reflection from the object surface. d. illumination of the object
Answers: 1
You know the right answer?
Show, by calculating net work and heat supplied, that for a carnot heat engine using air as a workin...
Questions
question
Geography, 21.08.2020 01:01
question
Mathematics, 21.08.2020 01:01
Questions on the website: 13722359