subject
Engineering, 03.01.2020 04:31 williamsjako

An ideal diesel cycle has a maximum cycle temperature of 2300°f and a cutoff ratio of 1.4. the state of the air at the beginning of the compression is p1=14.4 psia and t1=50°f. this cycle is executed in a four- stroke, eight-cylinder engine with a cylinder bore of 4 in and a piston stroke of 4 in. the minimum volume enclosed in the cylinder is 4.5 percent of the maximum cylinder volume. determine the power produced by this engine when it is operated at 1800 rpm. use constant specific heats at room temperature. (unit is hp)

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 18:10
A-mn has a cubic structure with a0 0.8931 nm and a density of 7.47 g/cm3. b-mn has a different cubic structure, with a0 0.6326 nm and a density of 7.26 g/cm3. the atomic weight of manganese is 54.938 g/mol and the atomic radius is 0.112 nm. determine the percent volume change that would occur if a-mn transforms to b-mn.
Answers: 2
question
Engineering, 04.07.2019 18:10
Water at the rate of 1 kg/s is forced through a tube with a 2.5 cm inner diameter. the inlet water temperature is 15°c, and the outlet water temperature is 50°c. the tube wall temperature is 14°c higher than the local water temperature all along the length of the tube. what is the length of the tube?
Answers: 3
question
Engineering, 04.07.2019 18:10
The flow rate of air through a through a pipe is 0.02 m5/s. a pitot static tube is placed in the flow. the radius of the pitot static tube is 1 mm. assuming the flow to be steady and the air to be at 300k, calculate the difference in total and static pressure if the diameter of the pipe is: (a) d 0.1 m d 0.05 m (c) d 0.01 m
Answers: 2
question
Engineering, 04.07.2019 18:20
Acertain flow of air (at stp) has a velocity distribution given by v i (in ft/s). if this flow is going through a 4 ft square area in the yz-plane (centered at the origin), what is the mass flow rate (in lbm/s)?
Answers: 2
You know the right answer?
An ideal diesel cycle has a maximum cycle temperature of 2300°f and a cutoff ratio of 1.4. the state...
Questions
question
Mathematics, 11.12.2020 01:00
question
Mathematics, 11.12.2020 01:00
Questions on the website: 13722363