subject
Engineering, 04.01.2020 06:31 peachijmin

Which one of the following activities is not exempt from licensure pursuant to chapter 471, f. s.? a person practicing engineering on property owned by him or her. a full time electrical engineer of progress energy corp. a civil engineer employed full time by the u. s. army corps of engineers. an independent consultant working on the design of an electrical distribution system project for progress energy corp. applicants for licensure with degrees from foreign institutions are required to document "substantial equivalency to abet criteria to the fbpe. they can do this by: providing a transcript from their institution to the board. providing a notarized certification that they have completed the requisite college credit hours set forth in rules 61615-20.007(2)(a) thru (2)(d), f. a.c. getting the evaluation of substantial equivalency from a provider of the service that is approved by the fbpe passing the principles & practice examination in order to verify an applicant's experience, the fbpe: follows guidelines set forth in rule 61615 20.002, f. a.c. relies on information obtained from personal references requires evidence of employment from employers or supervisors who are employed in the engineering profession. • all of the above.

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Adouble-strand no. 60 roller chain is used to transmit power between a 13-tooth driving sprocket rotating at 300 rev/min and a 52-tooth driven sprocket. a) what is the allowable horsepower of this drive? b) estimate the center-to-center distance if the chain length is 82 pitches. c) estimate the torque and bending force on the driving shaft by the chain if the actual horsepower transmitted is 30 percent less than the corrected (allowable) power.
Answers: 3
question
Engineering, 04.07.2019 19:10
Abarometer contains mercury with a density of 13600 kg/m3. atmospheric conditions are 95.8 kpa and 20 °c at 20 °c, the vapor pressure of the mercury is 0.000173 kpa. the column of mercury will rise to a height of most nearly. select one: a)- 0.38 m b)- 0.82 m c)- 0.48 m d)- 0.72 m
Answers: 1
question
Engineering, 04.07.2019 19:10
Analyze the factors that influence the choice between the following pairs of processes to make the products indicated: i) sand casting versus die casting of an electric-motor housing ii) thread rolling versus machining of a bolt for high-strength application. (co3/c5)
Answers: 3
question
Engineering, 04.07.2019 19:20
Acommercial grade cubical freezer, 4 m on a side, has a composite wall consisting of an exterior sheet of 5.0-mm thick plain carbon steel (kst= 60.5 w/m k), an intermediate layer of 100-mm thick polyurethane insulation (kins 0.02 w/m k), and an inner sheet of 5.0- mm thick aluminium alloy (kal polyurethane insulation and both metallic sheets are each characterized by a thermal contact resistance of r 2.5 x 104 m2 k/w. (a) what is the steady-state cooling load that must be maintained by the refrigerator under conditions for which the outer and inner surface temperatures are 25°c and -5°c, respectively? (b) for power saving purpose, which wall material should be increased/reduced in. thickness in order to reduce 50% of the cooling load found in part (a)? redesign the thickness of the proposed material. 177 w/m-k). adhesive interfaces between the q=575.93 w
Answers: 2
You know the right answer?
Which one of the following activities is not exempt from licensure pursuant to chapter 471, f. s.?...
Questions
question
Biology, 22.04.2021 02:40
question
English, 22.04.2021 02:40
Questions on the website: 13722362