Engineering, 06.01.2020 04:31 choltox8840
An assembly consist of two 15/64" thick plates at 6 1/2" knurled pipe, and a threaded rod insert through the plates and pipe. two 3/32" thick washers and a 3/4" thick hex nut are used on each end of the assembly . if 1/4" of threaded rod sticks out past the nut on each side of the assembly, what is the total length.
Answers: 2
Engineering, 04.07.2019 18:10
Thermal stresses are developed in a metal when its a) initial temperature is changed b) final temperature is changed c) density is changed d) thermal deformation is prevented e) expansion is prevented f) contraction is prevented
Answers: 2
Engineering, 04.07.2019 18:10
The drive force for diffusion is 7 fick's first law can be used to solve the non-steady state diffusion. a)-true b)-false
Answers: 1
Engineering, 04.07.2019 18:10
The thermal expansion or contraction of a given metal is a function of the f a)-density b)-initial temperature c)- temperature difference d)- linear coefficient of thermal expansion e)- final temperature f)- original length
Answers: 2
Engineering, 04.07.2019 18:10
Which one from below is not one of the reasons of planning failures? (clo3) a)-planner is careless. b-planner spend less time in the field but more time on the desk c)-planner is not qualified d)-planner does not have sufficient time to properly plan
Answers: 3
An assembly consist of two 15/64" thick plates at 6 1/2" knurled pipe, and a threaded rod insert thr...
Social Studies, 05.12.2019 02:31
Advanced Placement (AP), 05.12.2019 02:31
Computers and Technology, 05.12.2019 02:31
Mathematics, 05.12.2019 02:31