Answers: 2
Engineering, 04.07.2019 03:10
What precautions should you take to prevent injuries when dealing with heavy loads?
Answers: 1
Engineering, 04.07.2019 18:10
Slip occurs via two partial dislocations because of (a) the shorter path of the partial dislocation lines; (b) the lower energy state through partial dislocations; (c) the charge balance.
Answers: 1
Engineering, 04.07.2019 18:10
Items are similar to the free issue items, but their access is limited. (clo5) a)-bin stock items free issue b)-bin stock controlled issue c)-critical or insurance spares d)-rebuildable spares e)-consumables
Answers: 1
Engineering, 04.07.2019 18:10
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
Engineers have to be familiar with these principles...
Mathematics, 18.03.2021 20:40
Mathematics, 18.03.2021 20:40
Mathematics, 18.03.2021 20:40
English, 18.03.2021 20:40
Mathematics, 18.03.2021 20:40
English, 18.03.2021 20:40
Mathematics, 18.03.2021 20:40
English, 18.03.2021 20:40
Mathematics, 18.03.2021 20:40
Chemistry, 18.03.2021 20:40
Mathematics, 18.03.2021 20:40