subject
Engineering, 08.01.2020 05:31 Wemaybewrong

Aseawall with an opening is used to dampen the tidal influence in a coastal area (and limit erosion). the seawall is 2.5 m long (in the direction perpendicular to the page), the mean sea level on the sea side is 2.2 m above the centroid of the slot. the mean sea level on the land side of the wall is 1.4 m above the centroid of the slot. the sea side tide fluctuates +0.6 m, and the landward tide fluctuates +0.4 m.

the slot extends the entire length of the wall and is estimated to have a discharge coefficient of 0.80.

if the volume of seawater moving from the sea side to the land side of the wall is to be no more than 6 000 m' in 18 hours, what is the maximum allowable height of the slot?

note: the discharge coefficient is the ratio of the actual flow rate over the predicted flow rate. it mostly accounts for the fact that the average velocity is different from the velocity.

ansver
Answers: 1

Another question on Engineering

question
Engineering, 03.07.2019 14:10
Amass of 1.5 kg of air at 120 kpa and 24°c is contained in a gas-tight, frictionless piston-cylinder device. the air is now compressed to a final pressure of 720 kpa. during the process, heat is transferred from the air such that the temperature inside the cylinder remains constant. calculate the boundary work input during this process.
Answers: 2
question
Engineering, 04.07.2019 16:10
An electrical motor raises a 50kg load at a construct velencity .calculate the power of the motor, if it takes 40sec to raise the load through a height of 24m(take g =9.8n/g)
Answers: 2
question
Engineering, 04.07.2019 18:10
Aplate clutch has a single pair of mating friction surfaces 250-mm od by 175-mm id. the mean value of the coefficient of friction is 0.30, and the actuating force is 4 kn. a) find the maximum pressure and the torque capacity using the uniform-wear model. b) find the maximum pressure and the torque capacity using the uniform-pressure model.
Answers: 3
question
Engineering, 04.07.2019 18:10
True or false (explain) (110)[111] is a slip system in bcc metals . the {111} family in fcc contains 8 planes. resolved shear stress (rss) in single crystals is just related to the applied stress. critical resolved shear stress (crss) in single crystal metals is direct proportional to the number of defects in the structure
Answers: 2
You know the right answer?
Aseawall with an opening is used to dampen the tidal influence in a coastal area (and limit erosion)...
Questions
question
Computers and Technology, 28.01.2021 05:10
question
World Languages, 28.01.2021 05:10
question
Mathematics, 28.01.2021 05:10
question
Health, 28.01.2021 05:10
question
Chemistry, 28.01.2021 05:10
Questions on the website: 13722363