subject
Engineering, 14.01.2020 04:31 mistiehaas

Convert each of the following forms into the other canonical form (i. e., sum of minterms into product of maxterms, and vice versa). write down the result both in a simplified form (as below) and in terms of the variables. a) f(x, y, z) = {(2, 5, 6); b) f(a, b, c) = ii (0, 1, 2, 4, 7, 9, 12) simplify the following formulas using karnaugh maps by first identifying, whenever applicable, the essential prime implicants: a) f(w, x, y, z) = wyz + w’'x' + wxz' b) f(a, b, c, d) = a'b + a'cd + b’cd + bc’d’ c) f(w, x, y, z) = {(0, 2, 4, 5, 6, 7, 8, 10, 13, 15) d) f(a, b, c, d) = (0, 2, 3, 5, 7, 8, 10, 11, 14, 15)

ansver
Answers: 1

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Shafts are machine elements that are used to a) carry axial loads b) direct shear loads c) transmit power d) rotate at constant speed e) none of the above circular and square shafts subjected to the same torque under the same circum behave a) the same way b) almost the same way
Answers: 2
question
Engineering, 04.07.2019 18:10
Hydraulic fluid with a sg. of 0.78 is flowing through a 1.5 in. i.d. pipe at 58 gal/min. the fluid has an absolute viscosity of 11.8 x 105 lbf-sec/ft2. is the flow laminar, turbulent or within the critical range? give both a numerical reynolds number and a term answer.
Answers: 3
question
Engineering, 04.07.2019 18:20
Ahe-xe mixture containing a 0.75 mole fraction of helium is used for cooling electronics in an avionics application. at a temperature of 300 k and atmospheric pressure, calculate the mass fraction of helium and the mass density, molar concentration and molecular weight of the mixture. if the cooling capacity is 10 l, what is the mass of the coolant?
Answers: 3
question
Engineering, 04.07.2019 18:20
Asimple rankine cycle uses water as the working fluid. the water enters the turbine at 10 mpa and 480c while the condenser operates at 6 kpa. if the turbine has an isentropic efficiency of 80 percent while the pump has an isentropic efficiency of 70 percent determine the thermal efficiency
Answers: 1
You know the right answer?
Convert each of the following forms into the other canonical form (i. e., sum of minterms into produ...
Questions
Questions on the website: 13722363