Engineering, 15.01.2020 21:31 gunner20115

Apitfall cited in section 1.10 is expecting to improve the overall performance of a computer by improving only one aspect of the computer. consider a computer running a program that requires 250 s, with 70 s spent executing fp instructions, 85 s executed l/s instructions and 40 s spent executing branch instructions

(5 min, sec 1.10)by how much is the total time reduced if the time for fp operations is reduced by 20%?

(5 min, sec 1.10) by how much is the time for int operations reduced if the total time is reduced by 20%?
(5 min, sec 1.10) can the total time be reduced by 20% by reducing only the time for branch instructions?

Answers: 3

Show answers

Answers

a) For this case the new time to run the FP operation would be reduced 20% so that means 100-20% =80% from the original time

(1-0.2)*70 s =56s

The reduction on this case is 70-56 s=14s

And since the new total time would be given by 250-14=236 s

b) For this case the total time is reduced 20% so that means that the new total time would be (1-0.2)=0.8 times the original total time (1-0.2) *250s =200 s

The original time for INT operations is calculated as:

$250 = 70+85+40 +t_{INT}$

$t_{INT}=55s$

For this part the only time that was changed is assumed the INT operations so then:

$200 = 70+85+40 \Delta t_{INT}$

And then: $\Delta t_{INT}= 200-70-85-40=5 s$

c) A reduction of the total time implies that the total time would be 205 s from the results above. And the time for FP is 70, for L/S is 85 and for INT operations is 55 s, so then if we add 70+85+55=210s, we see that 210>205 so then we cannot reduce the total time 20% just reducing the branch intructions.

Explanation:

From the info given we know that a computer running a program that requires 250 s, with 70 s spent executing FP instructions, 85 s executed L/S instructions and 40 s spent executing branch instructions.

Part 1

For this case the new time to run the FP operation would be reduced 20% so that means 100-20% =80% from the original time

(1-0.2)*70 s =56s

The reduction on this case is 70-56 s=14s

And since the new total time would be given by 250-14=236 s

Part 2

For this case the total time is reduced 20% so that means that the new total time would be (1-0.2)=0.8 times the original total time (1-0.2) *250s =200 s

The original time for INT operations is calculated as:

$250 = 70+85+40 +t_{INT}$

$t_{INT}=55s$

For this part the only time that was changed is assumed the INT operations so then:

$200 = 70+85+40 \Delta t_{INT}$

And then: $\Delta t_{INT}= 200-70-85-40=5 s$

And we can quantify the decrease using the relative change:

$\% Change = \frac{5s}{55 s} *100 = 9.09\%$ of reduction

Part 3

A reduction of the total time implies that the total time would be 205 s from the results above. And the time for FP is 70, for L/S is 85 and for INT operations is 55 s, so then if we add 70+85+55=210s, we see that 210>205 so then we cannot reduce the total time 20% just reducing the branch intructions.

Answer from: Quest

answer: jesus loves you

explanation:

Answer from: Quest

Idon’t do engeneering classes sorry

Another question on Engineering

Engineering, 04.07.2019 18:20

Find the kinematic pressure of 160kpa. for air, r-287 j/ kg k. and hair al viscosity of air at a temperature of 50°c and an absolute (10 points) (b) find the dynamic viscosity of air at 110 °c. sutherland constant for air is 111k

Answers: 3

Answer

Engineering, 04.07.2019 18:20

Apiston-cylinder device contains 0.1 m3 of liquid water and 0.9 m3 of water vapor in equilibrium at 800 kpa. heat is transferred at constant pressure until the temperature of water reaches 350 °c. determine (a) the quality of water at the initial state (b) the work associated with this process, (c) the heat associated with this process.

Answers: 2

Answer

Engineering, 04.07.2019 19:20

In the winter, in order to keep the classroom steadily at 68 f before 10 pm, heating with an average rate of 42,000 btu/hr is provided. assume the outdoor temperature maintains at 32°f, determine the electrical power (kw) required to (a) operate a reversible heat pump (b) operate a real heat pump with a cop (7) of 4.5 and (c) operate an electrical-resistance heater.

Answers: 3

Answer

Engineering, 04.07.2019 19:20

List 3 options on how to reduce knocking problens during engine process,

Answers: 2

Answer

You know the right answer?

Apitfall cited in section 1.10 is expecting to improve the overall performance of a computer by impr...

Questions