subject
Engineering, 18.01.2020 04:31 imanim3851

Arear-wheel–drive car weighs 2600 lb and has an 84-inch wheelbase, a center of gravity 20 inches above the roadway surface and 30 inches behind the front axle, a drivetrain efficiency of 85%, 14-inch–radius wheels, and an overall gear reduction of 7 to 1. the car's torque/engine speed curve is given by the equation me=6ne−0.045ne2. if the car is on a paved, level roadway surface with a coefficient of adhesion of 0.75, determine its maximum acceleration from rest.

ansver
Answers: 1

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Thermal stresses are developed in a metal when its a) initial temperature is changed b) final temperature is changed c) density is changed d) thermal deformation is prevented e) expansion is prevented f) contraction is prevented
Answers: 2
question
Engineering, 04.07.2019 18:10
What are the two (02) benefits, which may result from a successful implementation of preventive maintenance (pm) program in an organization? (clo3)a)- lean manufacturing b)-overlapping responsibilities c)-the planner is not qualified d)-accurate contractor information e)-reduction in equipment redundancies f)-accurate stores information
Answers: 3
question
Engineering, 04.07.2019 18:20
Derive the correction factor formula for conical nozzle i=-(1+ cosa) and calculate the nozzle angle correction factor for a nozzle whose divergence hal-fangle is 13 (hint: assume that all the mass flow originates at the apex of the cone.
Answers: 3
question
Engineering, 04.07.2019 18:20
Steam enters a converging nozzle at 3.0 mpa and 500°c with a at 1.8 mpa. for a nozzle exit area of 32 cm2, determine the exit velocity, mass flow rate, and exit mach number if the nozzle: negligible velocity, and it exits (a) is isentropic (b) has an efficiency of 94 percent
Answers: 2
You know the right answer?
Arear-wheel–drive car weighs 2600 lb and has an 84-inch wheelbase, a center of gravity 20 inches abo...
Questions
Questions on the website: 13722367