Adsb-sc modulated signal is demodulated by applying it to a coherent detector. a. evaluate the effect of a frequency error delta f in the local carrier frequency of the detector, measured with respect to the carrier frequency of the incoming dsb-sc signal. b. for the case of a sinusoidal modulating wave, show that because of this frequency error, the demodulated signal exhibits beats at the error frequency. illustrate your answer with a sketch of this demodulated signal.

The force on a cutting tool are 2600n vertically downward and 2100 horizontal. determine the resultant force acting on the tool and the angle at which it acts.

Manometers are good examples of measuring instruments, nowadays they are not as common as before. a)-capacitive probe gauges b)-gravitational gauges deformation ) gauges d)-digital gauges

Afoot bridge is made as a simple deck, 4 m long, with a cross section 2 m (wide) and 20 cm thick, and made of wood. the deck is supported at the two ends. the maximum load allowable on the bridge is 10 tons, provided it is uniformly distributed on the deck. to sense this load, a strain gauge is placed at the center of the bridge and its resistance is monitored. if the sensor has a nominal resistance of 350 s2 and a gauge factor of 3.6, what is the reading of the strain gauge at maximum load? the modulus of elasticity for the wood used in the construction is 10 gpa.