subject
Engineering, 22.01.2020 15:31 Juli8283

1.
a circuit consists of a 10-h inductor in series with a 150-ohm resistor.
what is the current in the circuit 0.1 sec after 300-volts direct current
is applied?
a. 1.55 amps
c. 0.78 amp
d. 0.53 amp
b. 1.33 amps

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Draw the engineering stress-strain curve for (a) bcc; (b) fcc metals and mark important points.
Answers: 1
question
Engineering, 04.07.2019 18:10
An air compression refrigeration system is to have an air pressure of 100 psia in the brine tank and an allowable air temperature increase of 60°f for standard vapor compression cycle temperatures of 77 f entering the expansion cylinder and 14 f entering the compression cylinder, calculate the coefficient of performance a. 2.5 b 3.3 c. 4.0 d. 5.0
Answers: 3
question
Engineering, 04.07.2019 18:20
Inadequate stores control is not an obstacle to effective work order system. (clo4) a)-true b)-false
Answers: 3
question
Engineering, 04.07.2019 18:20
Athin walled concentric tube exchanger is used to cool engine oil from 160°c to 60°c with water that is available at 25°c acting as a coolant. the oil and water flow rates are each at 2 kg/s, and the diameter of the inner tube is 0.5 m and the corresponding value of the overall heat transfer coefficient is 250 w/m2. oc. how long must the heat exchanger be to accomplish the desired cooling? cpwater=4.187 kj/kg-candcpengine el=2.035 kj/kg·°c, oil . 120]
Answers: 1
You know the right answer?
1.
a circuit consists of a 10-h inductor in series with a 150-ohm resistor.
what is the cu...
Questions
question
Mathematics, 14.06.2021 07:30
question
Mathematics, 14.06.2021 07:30
question
Mathematics, 14.06.2021 07:30
question
History, 14.06.2021 07:30
Questions on the website: 13722367