Engineering, 23.01.2020 18:31 Calvinailove13

Asteady state and continuous separator has a total feed rate of 100. kg/h of a 55.0 wt. % benzene mixture. the balance is toluene (i. e., 45 wt. % toluene). a vapor stream leaves the process and has a benzene concentration of 85.0% by mass and a liquid stream leaving the process has a benzene concentration of 10.6% by mass. a. draw and label the process flow chart. develop a consistent variable naming system. b. simplify the general balance equation. c. write and solve the total mass balance and the benzene mass balance.

Answers: 3

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

A-mn has a cubic structure with a0 0.8931 nm and a density of 7.47 g/cm3. b-mn has a different cubic structure, with a0 0.6326 nm and a density of 7.26 g/cm3. the atomic weight of manganese is 54.938 g/mol and the atomic radius is 0.112 nm. determine the percent volume change that would occur if a-mn transforms to b-mn.

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.

Answers: 1

Answer

Engineering, 04.07.2019 18:20

Ahe-xe mixture containing a 0.75 mole fraction of helium is used for cooling electronics in an avionics application. at a temperature of 300 k and atmospheric pressure, calculate the mass fraction of helium and the mass density, molar concentration and molecular weight of the mixture. if the cooling capacity is 10 l, what is the mass of the coolant?

Answers: 3

Answer

Engineering, 04.07.2019 18:20

What is the heat treatment of metals? what is the benefit of it? why and how it's useful? answer in details, do not write by hand.

Answers: 3

Answer

You know the right answer?

Asteady state and continuous separator has a total feed rate of 100. kg/h of a 55.0 wt. % benzene mi...

Questions