Engineering, 23.01.2020 21:31 alyssams1213
If e = 94.2 mj of energy is transferred when q = 1.66 c of charge flows through a circuit element, what is the voltage across the circuit element?
Answers: 3
Another question on Engineering
Engineering, 04.07.2019 18:10
What difference(s) did you notice using a pneumatic circuit over hydraulic circuit.explain why the pneumatic piston stumbles when it hits an obstacle.
Answers: 2
Engineering, 04.07.2019 18:10
The flow rate of air through a through a pipe is 0.02 m5/s. a pitot static tube is placed in the flow. the radius of the pitot static tube is 1 mm. assuming the flow to be steady and the air to be at 300k, calculate the difference in total and static pressure if the diameter of the pipe is: (a) d 0.1 m d 0.05 m (c) d 0.01 m
Answers: 2
Engineering, 04.07.2019 18:10
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
Engineering, 04.07.2019 18:20
Steam enters a converging nozzle at 3.0 mpa and 500°c with a at 1.8 mpa. for a nozzle exit area of 32 cm2, determine the exit velocity, mass flow rate, and exit mach number if the nozzle: negligible velocity, and it exits (a) is isentropic (b) has an efficiency of 94 percent
Answers: 2
You know the right answer?
If e = 94.2 mj of energy is transferred when q = 1.66 c of charge flows through a circuit element, w...
Questions
Mathematics, 19.11.2020 18:40
Social Studies, 19.11.2020 18:40
Mathematics, 19.11.2020 18:40
Mathematics, 19.11.2020 18:40
Mathematics, 19.11.2020 18:40
Mathematics, 19.11.2020 18:40
Mathematics, 19.11.2020 18:40
Computers and Technology, 19.11.2020 18:40
