Engineering, 24.01.2020 01:31 emanueln

Consider the sinusoidal voltagev(t)=45cos(400πt+60∘)v. part awhat is the maximum amplitude of the voltage? express your answer to three significant figures and include the appropriate units. part bwhat is the frequency in hertz? express your answer using three significant figures. part cwhat is the frequency in radians per second? express your answer using three significant figures. part dwhat is the phase angle in radians? express your answer using three significant figures. part ewhat is the phase angle in degrees? express your answer using three significant figures. part fwhat is the period? express your answer to three significant figures and include the appropriate units. part gwhat is the first time after t=0 that v=0v? express your answer to three significant figures and include the appropriate units. part hthe sinusoidal function is shifted 5/6ms to the right along the time axis. what is the expression for v(t)? part iwhat is the minimum value of milliseconds that the function must be shifted to the left if the expression for v(t) is45sin(400πt)v?

Answers: 3

Show answers

Another question on Engineering

Engineering, 04.07.2019 16:10

The force on a cutting tool are 2600n vertically downward and 2100 horizontal. determine the resultant force acting on the tool and the angle at which it acts.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Aflywheel accelerates for 5 seconds at 2 rad/s2 from a speed of 20 rpm. determine the total number of revolutions of the flywheel during the period of its acceleration. a.5.65 b.8.43 c. 723 d.6.86

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Aplate clutch has a single pair of mating friction surfaces 250-mm od by 175-mm id. the mean value of the coefficient of friction is 0.30, and the actuating force is 4 kn. a) find the maximum pressure and the torque capacity using the uniform-wear model. b) find the maximum pressure and the torque capacity using the uniform-pressure model.

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.

Answers: 1

Answer

You know the right answer?

Consider the sinusoidal voltagev(t)=45cos(400πt+60∘)v. part awhat is the maximum amplitude of the vo...

Questions